Back to Alinco

Next Receiver



Alinco DJ-X100

Type: HF/VHF/UHF Receiver/Scanner
Frequency Range: 30-253.8/255-262/266-271/275-380.2/381.325-412/414-470 MHz
Modes: Analog:
AM / NAM / FM / NFM (Not between 76-108 MHz)
WFM (76-108 MHz only)

DV modes (Not between 76-108 MHz):
D-Star, DCR/NXDN, DMR/MotoTRBO, dPMR, Yaesu C4FM "Fusion"

Data modes (Not between 76-108 MHz): ACARS, AIS, B54, T98, T102
Memory Channels: 999 regular in 26 banks
50 search pairs
Alpha tags (14 or 28 characters, depending on font size)
Search Banks: N/A
Priority Channels: N/A
Scan Speed: N/A
Search Speed: N/A
Increment Steps: 1/3.125/5/6.25/8.33/10/12.5/15/20/25/3/50/100/125/150/200 KHz
Scan Delay: N/A
Voltage: 3.6 VDC (Li-Ion battery pack)
or 5 VDC external
Current Drain: 150-500 mA
Impedance: 50 ohms, SMA
Dimensions (W*H*D): 58 x 110 x 32 mm
2.28 x 4.33 x 1.26 inches
Weight: 260 g (9.17 oz), with EBP-114 and Antenna
Manufactured: 2007-200x
Other: CTCSS/PL and DCS decoder. 2" color TFT (320*240 pixels). GPS receiver for
positioning and location based scanning. USB-C jack for charging, external power
and PC programming. The headphone cord can also be used as an antenna. Voice
inversion descrambler. F-Count (Tunes to nearby transmissions, similar to Bearcat
Close Call). 12 KHz IF output. IP67 resistant. DSP/SDR technology
Related Documents: User Manual (5.1 MB)
Review Practical Wireless September-2025